Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3-1: Vehicle connector, vehicle inlet and cable assembly for DC charging intended to be used with a thermal management system

Official government website of the Government of the Kingdom of Saudi Arabia

How to verify

Links to official Saudi websites end withgov.sa

All links to official websites of government agencies in the Kingdom of Saudi Arabia end with .gov.sa

Government websites use the HTTPS protocol for encryption and security.

Secure websites in the Kingdom of Saudi Arabia use the HTTPS protocol for encryption.

Number

2023/109
Issue date

10-09-2023
Expiration date

10-12-2023
Status

Finished

Description

IEC TS 62196-3-1:2020(E) applies to accessories and cable assemblies with the same configuration as specified in IEC 62196-3:2014 with rated operating voltage not exceeding 1 500 V DC and a rated current not exceeding 500 A that employ

- thermal sensing, or

- thermal transport and thermal sensing with the system architecture described in 4.101.

These accessories and cable assemblies are intended to be used in conductive charging systems for circuits specified in IEC 61851-23.

NOTE Edition 2 of IEC 61851-23 is under development.

The accessories covered by this document are intended to be used in charging mode 4 according to IEC 61851-1. These accessories are intended to be connected to cables according to the IEC 62893 series for DC cables.

International reference number

IEC TS 62196-3-1:2020

Project type

Adoption